Product Information

Stainless Steel Instant Water Heater Faucet
The faucet with instant water heater has a bottom water inlet and a 1/2-inch interface. During installation, the faucet can only be installed upright, and the water pressure required is 0.04 ~ 0.05 MPa. Heating range: 30-60 °C. Voltage: 220V, Power: 3000W.

Easy to Use
Our electric instant water heater undergone rigorous testing. The electrical and fluid systems are completely separated to advance electrical leaks and water pipe corrosion. Note: The faucet must be run through water before use and cannot be subjected to dry burning.

Easy to Use
The extendable arm tube is seamly connected and does not leak. At the same time, it can be Extended 360 degrees as desied. The instant water heater uses an LED Display that intuitively detects temperature changes. The data is accuse, agree, and fast, making it suitable for family use.

Need:
1. Please turn on the cold water before turn on the power. It is strictly forbidden to use water purifiers, water filter falcets, etc. During installation, the original accessories must be blocked to the machine from overheating and damaging the unit.
2. Before installation, be sure to connect the water supply first and then turn it on. The product must be installed vertically and upyards; do not install it side by side, upside down, horizontal gold.
3. Please be careful in the following two situations:
1. Users who use low-pressure areas gold water towns, or who live in high- and low-pressure areas.
2. Old-style houses. The wires in the House are very old. The wire is too thin to cover 2 square meters.
4. The machine is started by water pressure. Users who are not exposed to tap. tap water, water tanks, gold water trails, or whose water pressure is too low (the water tank and water tow drop is less than 6 meters) are not recommended to purchase it.
4. Each product undergoes lay-by-lay testing before ship, including heating tests, anti-leakage tests, and anti-leakage tests. It is normal for residual water droplets to remain in the cavity after receiving the product.

Note: The lower the water flow, the higher the temperature.