CTOLITY AP2000 + SP200 All-in-One Solar Power Kit

2400W High Output · 2048Wh Massive Capacity · 200W Foldable Solar Panel

LiFePO₄ Safe Battery · Pure Sine Wave · Off-Grid Continuous Power

【One Complete Set, Total Power Freedom】

🌞 Charge by day, power by night. No outlets needed. No generators required.

This is a complete off-grid power solution. The AP2000 power station stores and delivers electricity, while the SP200 foldable solar panel continuously recharges it in the wild. The two connect directly via an MC4 interface—plug and play, no extra adapters needed.

Whether you're RV camping, tenting, preparing for home emergencies, or working at remote job sites, this combo gives you reliable, stable power anytime, anywhere.

【AP2000 Power Station Core Features】

🔋 Safer LiFePO₄ Battery Chemistry
The AP2000 uses automotive-grade Lithium Iron Phosphate (LiFePO₄) technology. Compared to standard lithium-ion batteries:

✅ No fire, no explosion — Extremely high thermal stability, safe even under overcharge/over-discharge

✅ Cycle life ≥ 3,000 cycles — One charge per day = nearly 10 years of use

✅ Stable output in extreme temperatures — Reliable from -20℃ to 60℃

✅ Excellent capacity retention — Maintains 80%+ capacity after 3,000 cycles

Say goodbye to battery degradation anxiety. This is a power station built for the long haul.

⚡ 2400W Pure Sine Wave Inverter — Safe for ALL Devices

This is true pure sine wave output (THD < 3%)—the same clean, stable waveform as your home wall outlet. That means:

Peak output reaches 4800W, easily handling the surge power required by motor-driven devices during startup.

🔌 Multiple Output Ports — Charge Everything at Once

The AP2000 comes with a full suite of output options for simultaneous multi-device power:

>> AC Outlets × multiple — Pure sine wave, 220V / 2400W

>> USB-A × multiple — QC fast charge supported

>> USB-C × multiple — PD fast charge supported

>> DC 12V Cigarette Lighter Port × multiple — For vehicle devices

Solar Input Port — Optimized specifically for SP200 compatibility

🛡️ Reverse Charging Protection — Safeguard Your Power Station

At night or during low-light conditions, the SP200 automatically cuts the current loop to prevent the AP2000's battery from discharging back into the solar panel. This eliminates standby power loss and protects both devices.

【SP200 Solar Panel: The Perfect Charging Companion for AP2000】

☀️ 200W High-Efficiency Monocrystalline — Capture Every Ray of Sunlight
The SP200 uses Grade A+ monocrystalline silicon solar cells, achieving a laboratory-tested conversion efficiency of 22%. Even under 1000W/m² low-irradiance conditions (cloudy, early morning, late afternoon), it maintains strong power generation—far outperforming traditional polycrystalline panels.

AP2000 Power Station

SP200 Solar Panel

Can the CTOLITY AP2000 Serve as a Reliable Emergency Power Supply?

In regions prone to hurricanes, wildfires, or grid failures, having a dependable emergency power supply is not optional—it’s essential. A user from Florida (username: @StormReady2022) shared their experience during Hurricane Ian: “When the power went out for 7 days, the CTOLITY AP2000 kept my phone charged, ran my CPAP machine, powered a small TV for news updates, and even cooled my meds with a mini fridge. It was my lifeline.” The 2048Wh LiFePO4 battery ensures long runtime during outages, while the AC outlets and USB ports support a wide range of devices. The unit also features a built-in battery management system (BMS) that protects against overcharging, over-discharging, short circuits, and overheating—critical for safety during emergencies.

1.Connect the AP2000 to a solar panel (recommended: 300W–600W) for continuous recharging during daylight.

2.Plug in essential devices via AC outlets, USB-A, USB-C, or DC ports.

3.Monitor battery level via the LCD screen and use the low-battery alert to plan recharging.

4.Use the built-in handle and rugged design to move it easily between rooms or to your vehicle.

5.Recharge via wall outlet when grid power returns—fully charged in under 4 hours.

How Do I Set Up the CTOLITY AP2000 for Solar Charging?

Setting up solar charging is simple and intuitive. Here’s a step-by-step guide based on real user feedback:

1.Unpack the AP2000 and place it in direct sunlight, ideally with a clear, unobstructed view of the sky.

2.Connect your solar panels (300W–600W recommended) to the MPPT solar input port using the included MC4 connectors.

3.Turn on the power station. The LCD screen will display solar input voltage and charging status.

4.Monitor the charging progress. On a sunny day, expect 100–150Wh per hour of solar input.

5.Once fully charged, disconnect solar panels and use the power station for your devices.

Users have reported that with two 300W solar panels, the AP2000 can reach 80% charge in just 5 hours—ideal for daily recharging during extended trips.